Products
Fixed Price Repair Service
£34.95
Is your product worn out
and in need of some TLC?
We offer a comprehensive repair service with a fast turnaround.
(typically 7-10 working days upon receipt of product & payment).
- Fixed price repair service covers the following products:
- KWT-002 Impact Wrenches (excludes KWT-002CS)
- KWT-005 Impact Driver
- KWT-007 Angle Grinder
- For any repairs not covered by the Kielder Warranty
(see product manual / online warranty statement for terms and conditions) - Price inclusive of carriage (both ways) and labour (please call us on 0114 242 3794 to arrange product return)
- Repair covered by 3 month warranty
(standard Kielder terms and conditions apply) - Excludes batteries - separate charge for non-warranty battery repairs.
Please note: It is your responsibility to return any batteries, that you suspect could be faulty, with the tool you are sending in for repair. If we receive the tool with no batteries and it is deemed to be a battery fault that is causing the issue, then a minimum further charge of £12 inc VAT will apply.
Fixed Price Repair Service (Drills Only)
£24.95
Applies only to KWT-001 (Drill Driver & Combi Drill)
We offer a comprehensive repair service with a fast turnaround.
(typically 7-10 working days upon receipt of product & payment).
- For any repairs not covered by the Kielder Warranty
(see product manual / online warranty statement for terms and conditions) - Price inclusive of carriage (both ways) and labour (please call us on 0114 242 3794 to arrange product return)
- Repair covered by 3 month warranty
(standard Kielder terms and conditions apply) - Excludes batteries - separate charge for non-warranty battery repairs.
Please note: It is your responsibility to return any batteries, that you suspect could be faulty, with the tool you are sending in for repair. If we receive the tool with no batteries and it is deemed to be a battery fault that is causing the issue, then a minimum further charge of £12 inc VAT will apply.
Fixed Price Repair Service (KWT-012 Impact Wrench)
£39.95
Applies only to KWT-012 1/2" Impact Wrench
We offer a comprehensive repair service with a fast turnaround.
(typically 7-10 working days upon receipt of product & payment).
- For any repairs not covered by the Kielder Warranty
(see product manual / online warranty statement for terms and conditions) - Price inclusive of carriage (both ways) and labour (please call us on 0114 242 3794 to arrange product return)
- Repair covered by 3 month warranty
(standard Kielder terms and conditions apply) - Excludes batteries - separate charge for non-warranty battery repairs.
Please note: It is your responsibility to return any batteries, that you suspect could be faulty, with the tool you are sending in for repair. If we receive the tool with no batteries and it is deemed to be a battery fault that is causing the issue, then a minimum further charge of £12 inc VAT will apply.
Fixed Price Repair Service (TYPE18 2.0Ah Batteries Only)
£24.95
Applies only to KWT-003-04 TYPE18 2.0Ah 18v Li-Ion Batteries
We offer a comprehensive repair service with a fast turnaround.
(typically 7-10 working days upon receipt of product & payment)
- For any repairs not covered by the Kielder Warranty
(see product manual / online warranty statement for terms and conditions) - Price inclusive of carriage (both ways) and labour (please call us on 0114 242 3794 to arrange product return)
- Battery may be replaced with a 'Grade A condition' battery*, rather than repaired.
- Repair / Replacement covered by 3 month warranty
(standard Kielder terms and conditions apply)
*Grade A: may be slightly used but will be in good condition, full working order and checked thoroughly by a Kielder Technician.
Fixed Price Repair Service (TYPE18 4.0Ah Batteries Only)
£44.95
Applies only to KWT-003-03 TYPE18 4.0Ah 18v Li-Ion Batteries
We offer a comprehensive repair service with a fast turnaround.
(typically 7-10 working days upon receipt of product & payment)
- For any repairs not covered by the Kielder Warranty
(see product manual / online warranty statement for terms and conditions) - Price inclusive of carriage (both ways) and labour (please call us on 0114 242 3794 to arrange product return)
- Battery may be replaced with a 'Grade A condition' battery*, rather than repaired.
- Repair / Replacement covered by 3 month warranty
(standard Kielder terms and conditions apply)
*Grade A: may be slightly used but will be in good condition, full working order and checked thoroughly by a Kielder Technician.
KWT-001 18v TYPE18 Drill Driver (Bare)
£42.98
18v Drill Driver - Body Only
Bare unit, exactly the same brushless drill driver as what is supplied in the kit versions. If you already have TYPE18 batteries to hand this bare unit represents incredible value as an additional item. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• 38mm max drilling diameter in wood.
• 13mm max drilling diameter in steel.
• 52Nm Max Torque driven through 16 Torque settings for driving, plus drill mode.
• 2 Speed gearbox: 0-400 min-1 / 0-1450 min-1.
• Variable trigger switch allows further speed control.
LIGHTWEIGHT & STRONG
• Weighs in at only 1.5kg with 2.0Ah battery fitted.
• Extensive over-moulded rubber hand grip for comfort and protection.
KWT-001 TYPE18 18v Combi Drill
Sold Out
18v Combi Drill
Well-balanced combi drill with a robust all-metal chuck. Ideal for an array of drilling applications. Features 16 torque settings plus drill function and a hammer mode for masonry. Driven by a digital brushless motor and fuelled by Samsung Li-Ion batteries, offering high performance, long run-time and lifespan. Other features include an integrated LED light, moulded soft-grip handle and variable speed trigger for optimum control.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
RELIABLE & STABLE PERFORMANCE
• High quality Samsung battery cells.
• Lithium-ion battery technology, No memory effect from partial charging.
• A charged battery unit will hold it’s charge for up to 12 months.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• 38mm max drilling diameter in wood.
• 13mm max drilling diameter in steel.
• 10mm max drilling diameter in masonry.
• Max. torque: 52Nm
• 16 torque settings for driving, plus drill & hammer modes.
• 2 Speed gearbox: 0-400 min-1 / 0-1450 min-1.
• Variable trigger switch allows further speed control.
LIGHTWEIGHT & STRONG
• Weighs in at only 1.8kg with 2.0Ah battery fitted.
• Extensive over-moulded rubber hand grip for comfort and protection.
INCLUDES: Choice of Samsung Li-ion Batteries • Side Handle • Depth Rod • Charger • Stackable Carry Case.
KWT-001 TYPE18 18v Combi Drill (Bare)
Sold Out
18v Combi Drill - Body Only
Well-balanced combi drill with a robust all-metal chuck. Ideal for an array of drilling applications. Features 16 torque settings plus drill function and a hammer mode for masonry. Driven by a digital brushless motor and fuelled by Samsung Li-Ion batteries (not included), offering high performance, long run-time and lifespan. Other features included a moulded soft-grip handle and variable speed trigger for optimum control. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• 38mm max drilling diameter in wood.
• 13mm max drilling diameter in steel.
• 10mm max drilling diameter in masonry.
• Max. torque: 52Nm
• 16 torque settings for driving, plus drill & hammer modes.
• 2 Speed gearbox: 0-400 min-1 / 0-1450 min-1.
• Variable trigger switch allows further speed control.
LIGHTWEIGHT & STRONG
• Weighs in at only 1.8kg with battery fitted.
• Extensive over-moulded rubber hand grip for comfort and protection.
KWT-001 TYPE18 18v Drill Driver
£84.98
18v Drill Driver
This cordless drill driver offers exceptional performance to drive fixings or drill large hole through tough material. Perfectly balanced when in use this is a drill which can be used for hour after hour, both because of the comfort and the state of the art power plant, which keeps it going longer, per charge, than a conventional cordless drill. Other features include integrated LED light, moulded soft-grip handle and variable speed trigger switch for optimum control.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
RELIABLE & STABLE PERFORMANCE
• High quality Samsung battery cells
• Lithium-ion battery technology, No memory effect from partial charging.
• A charged battery unit will hold it’s charge for up to 12 months.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• 38mm max drilling diameter in wood.
• 13mm max drilling diameter in steel.
• 52Nm Max Torque driven through 16 Torque settings for driving, plus drill mode.
• 2 Speed gearbox: 0-400 min-1 / 0-1450 min-1.
• Variable trigger switch allows further speed control.
LIGHTWEIGHT & STRONG
• Weighs in at only 1.5kg with 2.0Ah battery fitted.
• Extensive over-moulded rubber hand grip for comfort and protection.
INCLUDES: Choice of Samsung Li-ion Batteries • Charger • Stackable Carry Case.
KWT-002 18v TYPE18 1/2" 430Nm Impact Wrench (Bare)
£89.98
18v 1/2" Impact Wrench - Body Only
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery (not included), the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg with a battery fitted it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before. Compatible with Kielder TYPE18 battery system.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
KWT-002 TYPE18 18v 3/8" Impact Wrench
£119.98
18v 3/8" Impact Wrench
Featuring 3/8" square drive allowing you to fit slim-line sockets (from 6mm diameter), this lightweight, compact wrench is ideal when working on smaller fastenings in hard-to-reach areas. So whether you're removing a car's oil pan or even servicing a go-kart, the nimble KWT-002 3/8" is the perfect tool. Equipped with moulded soft grip handle and variable speed trigger switch for optimum comfort and control.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
RELIABLE & STABLE PERFORMANCE
• High quality Samsung battery cells.
• Lithium-ion technology. No memory effect from partial charging.
• A charged battery unit will hold it's charge for up to 12 months.
• Compatible with Kielder TYPE18 battery system.
VERSATILE & EASY TO USE
• High performance from a low electrical current, with no power drop off at peak output.
• Variable trigger switch allows speed control when tightening, particularly useful on small fastenings.
• Suitable for a variety of applications; 6mm to 19mm impact sockets can be used.
COMPACT & LIGHTWEIGHT
• 3/8" enables use of slim sockets for easy access to smaller fastenings.
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
INCLUDES: Choice of Samsung Li-ion Batteries • Charger • Stackable Carry Case.
KWT-002 TYPE18 18v 3/8" Impact Wrench (Bare)
£79.98
18v 3/8" Impact Wrench - Body Only
Featuring 3/8" square drive allowing you to fit slim-line sockets (from 6mm diameter), this lightweight, compact wrench is ideal when working on smaller fastenings in hard-to-reach areas. So whether you're removing a car's oil pan or even servicing a go-kart, the nimble KWT-002 3/8" is the perfect tool. Equipped with moulded soft grip handle and variable speed trigger switch for optimum comfort and control. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
VERSATILE & EASY TO USE
• High performance from a low electrical current, with no power drop off at peak output.
• Variable trigger switch allows speed control when tightening, particularly useful on small fastenings.
• Suitable for a variety of applications; from 6mm to 19mm impact sockets can be used.
COMPACT & LIGHTWEIGHT
• 3/8" enables use of slim sockets for easy access to smaller fastenings.
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
KWT-002-03 TYPE18 18v 1/2" 430Nm Impact Wrench
£159.98
18v 1/2" Impact Wrench
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery, the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg (including the battery) it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
INCLUDES: 1 x 4.0Ah Samsung Li-Ion Battery • Charger • Stackable Carry Case
KWT-002-08 TYPE18 18v 1/2" 430Nm Impact Wrench (includes 3 Impact Sockets)
£204.98
18v 1/2" Impact Wrench
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery, the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg (including the battery) it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
INCLUDES: 2 x 4.0Ah Samsung Li-Ion Battery • Charger • 3 x 1/2" Impact Sockets (17, 19 & 21mm) • Stackable Carry Case.
KWT-002-22 TYPE18 18v 3/8" Impact Wrench (Includes 4 Sockets & Extension)
£149.98
18v 3/8" Impact Wrench
Compact and lightweight 3/8” Impact Wrench powered by a smooth digital brushless motor for optimum power delivery and efficient run-time, per battery charge. Equipped with moulded soft grip handle and variable speed trigger switch for optimum comfort and control in use.
This kit is supplied with 2 x 2.0Ah Li-Ion Batteries, Charger, 10, 13, 19 & 22mm 3/8” Impact Sockets, plus 150mm Extension. Ideal for the service and preparation of Karts, as well as other light duty automotive applications.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
RELIABLE & STABLE PERFORMANCE
• High quality Samsung battery cells.
• Lithium-ion technology. No memory effect from partial charging.
• A charged battery unit will hold its charge for up to 12 months.
• Compatible with Kielder TYPE18 battery system.
VERSATILE & EASY TO USE
• High performance from a low electrical current, with no power drop off at peak output.
• Variable trigger switch allows speed control when tightening, particularly useful on small fastenings.
• Suitable for a variety of applications; 6mm to 19mm impact sockets can be used.
COMPACT & LIGHTWEIGHT
• 3/8" enables use of slim sockets for easy access to smaller fastenings.
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
INCLUDES: 2 x 2.0Ah Samsung Li-ion Batteries • Charger • 10, 13, 19 & 22mm 3/8" Impact Sockets • 150mm Extension • Stackable Carry Case.
KWT-002CS Service
£39.95
Is your product worn out
and in need of some TLC?
We offer a comprehensive repair service with a fast turnaround.
(typically 7-10 working days upon receipt of product & payment).
• This relates to KWT-002CS Service Two and any services beyond Service Three (full details of services can be found within KWT-002CS service offer)
• For any repairs not covered by the Kielder Warranty (see product manual / online warranty statement for terms and conditions)
• Price inclusive of carriage (both ways) and labour (please call us on 0114 242 3794 to arrange product return)
• Repair covered by 3 month warranty (standard Kielder terms and conditions apply)
• Excludes batteries - separate charge for non-warranty battery repairs.
Please note: It is your responsibility to return any batteries, that you suspect could be faulty, with the tool you are sending in for repair. If we receive the tool with no batteries and it is deemed to be a battery fault that is causing the issue, then a minimum further charge of £12 inc VAT will apply.
KWT-002CS TYPE18 18v 1/2" Site Impact Wrench
£229.98
18v 1/2" Impact Wrench - Construction / Site Model
Featuring clip and pin type 1/2" square drive and enhanced dust protection, the KWT-002CS is more suited towards construction / site work, or any application where the socket size is not frequently changed. High-tech 4.0Ah Samsung batteries fuel a smooth digital brushless motor maximising your work-time per charge and the compact lightweight design enables it to be used in tight or awkward spaces. Plus with a market leading ‘power to weight ratio’ there’s more than enough nut-breaking torque to deal with stubborn fixings.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Clip & Pin Square Drive (SKWT-002-CSPO O-Ring & Pin can be used to secure socket - sold separately).
INCLUDES: 2 x 4.0Ah Samsung Li-ion Batteries • Charger • Stackable Carry Case • Service Offer
KWT-002CS TYPE18 18v 1/2" Site Impact Wrench (Bare)
£114.98
18v 1/2" Impact Wrench - Construction / Site Model - Body Only
Featuring clip and pin type 1/2" square drive and enhanced dust protection, the KWT-002CS is more suited towards construction / site work, or any application where the socket size is not frequently changed. The smooth digital brushless motor maximises your work-time per battery charge and the compact lightweight design enables it to be used in tight or awkward spaces. Plus with a market leading ‘power to weight ratio’ there’s more than enough nut-breaking torque to deal with stubborn fixings. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Clip & Pin Square Drive (SKWT-002-CSPO O-Ring & Pin can be used to secure socket - sold separately).
INCLUDES: 1/2" CS Impact Wrench • Service Offer.
KWT-002CS TYPE18 18v 1/2" Site Impact Wrench: Full Kit
£244.98
18v 1/2" CS Impact Wrench with Accessories
The full Kielder kit for working on site. Featuring clip and pin type 1/2" square drive and enhanced dust protection, the KWT-002CS is more suited towards construction / site work, or any application where the socket size is not frequently changed. High-tech 4.0Ah Samsung batteries fuel a smooth digital brushless motor maximising your work-time per charge and the compact lightweight design enables it to be used in tight or awkward spaces. Plus with a market leading ‘power to weight ratio’ there’s more than enough nut-breaking torque to deal with stubborn fixings. Includes tailored Kielder Service Offer.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Clip & Pin Square Drive (SKWT-002-CSPO Pin & O-Ring can be used to secure socket)
FULL KIT INCLUDES: Impact Wrench • 2 x 4.0Ah Samsung Li-ion Batteries • 21mm Mid (52mm) 1/2" Impact Socket • 21mm Deep (80mm) 1/2" Impact Socket • 3 x Socket Retaining Pin & O-Ring • Safety Lanyard • Charger • Stackable Carry Case • Service Offer
KWT-002CS Upgrade
£39.95
Official Site Version Upgrade
• We transform your existing KWT-002 Impact Wrench, with ball bearing square drive, in to a product better suited for Construction / Site Work.
• Upgrade includes: 1/2" Clip & Pin Square Drive, High Grade Needle Bearing & Seal, Enhanced Dust Protection and Service Offer.
• Price inclusive of carriage (both ways) and labour (please call us on 0114 242 3794 to arrange product return)
• Fast turnaround (typically 7-10 working days upon receipt of product & payment)
• Upgrade covered by 1 Year Warranty (standard Kielder warranty terms and conditions apply).
Please note: It is your responsibility to return any batteries, that you suspect could be faulty, with the tool you are sending in for repair. If we receive the tool with no batteries and it is deemed to be a battery fault that is causing the issue, then a minimum further charge of £12 inc VAT will apply.
KWT-003 TYPE18 18v Li-ion 2.0Ah Battery
£36.98
TYPE18 2.0Ah Battery
For use with any Kielder TYPE18 Product either as an additional battery pack or replacement. 40 minutes charging time.
Compatible with:
KWT-001 18v Drill Driver
KWT-001 18v Combi Drill
KWT-002 18v 3/8" Impact Wrench
KWT-005 18v Impact Driver
KWT-006 18v LED Worklight
KWT-004 TYPE18 Charger
KWT-002 18v 1/2" Impact Wrench (2.0Ah suitable for light use only)
RELIABLE & STABLE PERFORMANCE
• High quality Samsung battery cells.
• Lithium-ion battery technology.
• A charged battery unit will hold it’s charge for up to 12 months.
• No memory effect from partial charging.
KWT-003 TYPE18 18v Li-Ion 4.0Ah Battery
£67.98
TYPE18 4.0Ah Battery
For use with any Kielder TYPE18 Product either as an additional battery pack or replacement. 80 minutes charging time.
Compatible with:
KWT-012 1/2" 18v Impact Wrench
KWT-002 1/2" 18v Impact Wrench
KWT-002CS 1/2" 18v Impact Wrench
KWT-001 18v Drill Driver
KWT-001 18v Combi Drill
KWT-002 18v 3/8" Impact Wrench
KWT-005 18v Impact Driver
KWT-007 18v Angle Grinder
KWT-006 18v LED Worklight
KWT-004 TYPE18 Charger
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
KWT-004 TYPE18 18v Charger
£24.98
Compatible with all Kielder TYPE18 batteries.
• Charge time on 2.0Ah (40 mins)
• Charge time on 4.0Ah (80 mins)
• Features screw mounts allowing charger to be fixed to a wall or flat surface.
KWT-005 TYPE18 18v 1/4" Impact Driver
£119.98
18v 1/4" Impact Driver
Boasting 200Nm of torque and 3250 impacts per minute, this compact, lightweight Impact Driver makes simple work of the most demanding applications. Powered by a digital brushless motor and fuelled by Samsung Li-Ion batteries which enhances the performance, as well as offering longer run-time and tool life. Features moulded soft-grip handle and variable speed trigger switch for optimum comfort and control.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
RELIABLE & STABLE PERFORMANCE
• High quality Samsung battery cells.
• Lithium-ion technology. No memory effect from partial charging.
• A charged battery unit will hold it's charge for up to 12 months.
• Compatible Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• High performance from a low electrical current, with no power drop off at peak output.
• Variable trigger switch allows speed control when tightening, particularly useful on more delicate building materials such as plasterboard.
• Suitable for a variety of applications where high torque is required, such as wide gauge screws and fastenings.
COMPACT & LIGHTWEIGHT
• Standard 1/4" Keyless Hex-Bit Drive enables all compatible impact driver bits to be used.
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
INCLUDES: Choice of Samsung Li-ion Batteries • Charger • Stackable Carry Case.
KWT-005 TYPE18 18v 1/4" Impact Driver (Bare)
£79.98
18v 1/4" Impact Driver - Body Only
Boasting 200Nm of torque and 3250 impacts per minute, this compact, lightweight Impact Driver makes simple work of the most demanding applications. Powered by a digital brushless motor and fuelled by Samsung Li-Ion batteries (not included) which enhances the performance, as well as offering longer run-time and tool life. Features moulded soft-grip handle and variable speed trigger switch for optimum comfort and control. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• High performance from a low electrical current, with no power drop off at peak output.
• Variable trigger switch allows speed control when tightening, particularly useful on more delicate building materials such as plasterboard.
• Suitable for a variety of applications where high torque is required, such as wide gauge screws and fastenings.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/4” Keyless Bit Holder.
KWT-006 TYPE18 18v LED Worklight (Bare)
£18.98
18v LED Worklight
Multi-positional, pocket-sized ultra bright LED worklight. Bare unit; compatible with all Kielder TYPE18 batteries.
COMPACT & VERSATILE
• 3 LED design.
• Over 16 hours illumination from 4.0Ah battery.
• Bright white light for clarity.
• Multi-positional to suit application, offers 180 degree adjustment of lit area.
• Unique latching hook design means you can easily hang within or above work area.
• Adjustable angle function to direct the light precisely where you need it.
• Folds neatly down to pocket size.
KEY SPECIFICATION
Weight (with 2.0Ah battery): 0.5kg
Weight (without battery): 0.14kg
Length: 117mm
Width: 74mm
Height: 40mm
KWT-007 TYPE18 18v 115mm Angle Grinder
£224.98
18v 115mm Angle Grinder
Powered by a digital brushless motor, this versatile 18v Li-ion Angle Grinder can be used for an array of grinding & cutting applications. The long-run 4.0Ah batteries typically provide 15-20 minutes grinding performance each, so you can enjoy the freedom of cordless for longer. Features a shaped ergonomic soft-grip handle, which provides comfortable continuous operation and unobtrusive reverse-fit battery that balances the tool in use. The Kielder KWT-007 ticks all of the boxes for fast, effective grinding - POWER. ENDURANCE. BALANCE.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• No sparking, from motor, during operation.
• Features electric current overload protection system for longer service life and battery run-time.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• The convenience of cordless, but without compromising performance; proficient and effective in a variety of applications.
• The digital brushless motor delivers consistent power for faster grinding.
• Long run-time; a fully charged battery offers up to 20 minutes working time.
• High performance from a low electrical current, with no power drop off at peak output.
BALANCED & ERGONOMIC
• Ergonomically formed handle; designed for ultimate comfort when used for prolonged periods.
• Balanced feel in use.
• Reverse-fit battery maintains a compact overall profile.
• Central spindle lock position means you can comfortably operate a disc change with either hand.
• Features cam-lock adjustable guard mechanism, for quick adjustment around the disc.
INCLUDES: 2x 4.0Ah Samsung Li-ion Battery • 80 Minute Charger • Side Handle • Stackable Carry Case.
KWT-007 TYPE18 18v 115mm Angle Grinder (Bare)
£109.98
18v 115mm Angle Grinder - Body Only
Powered by a digital brushless motor, this versatile 18v Li-ion Angle Grinder can be used for an array of grinding & cutting applications. With a long-run 4.0Ah battery fitted* (not included) it will typically provide 15-20 minutes grinding performance, so you can enjoy the freedom of cordless for longer. Features a shaped ergonomic soft-grip handle, which provides comfortable continuous operation and unobtrusive reverse-fit battery that balances the tool in use. The Kielder KWT-007 ticks all of the boxes for fast, effective grinding - POWER. ENDURANCE. BALANCE.
*For best performance, use with TYPE18 4.0Ah battery (KWT-003-03).
1.5Ah (KWT-003-01) & 2.0Ah (KWT-003-04) batteries are not suitable for use with this product.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• No sparking, from motor, during operation.
• Features electric current overload protection for longer service life and battery run-time.
POWER TO GET THE JOB DONE
• The convenience of cordless, but without compromising performance; proficient and effective in a variety of applications.
• The digital brushless motor delivers consistent power for faster grinding.
• Long run-time; a fully charged battery offers up to 20 minutes working time.
• High performance from a low electrical current, with no power drop off at peak output.
BALANCED & ERGONOMIC
• Ergonomically formed handle; designed for ultimate comfort when used for prolonged periods.
• Balanced feel in use.
• Reverse-fit battery maintains a compact overall profile.
• Central spindle lock position means you can comfortably operate a disc change with either hand.
• Features cam-lock adjustable guard mechanism, for quick adjustment around the disc.
KWT-008 Tool Flight Case System (with Standard Flexi Foam)
£104.98
Your Kit. Your Way.
Fully customisable and transportable tool storage solution from Kielder.
A professional quality, heavy-duty case supplied with 2 x Standard Flexi Foam Inserts, Cutting Tool and Instructions, meaning you can design a layout that is tailored to your tool kit.
Ideal for motorsport service crews, race & rally teams, plus any application / industry where mobile tool and equipment storage is required, such as fitters, agriculture, construction, service and maintenance.
Kielder Combo Kits are also available. Click below for more details.
Key Features:
- Dual locking system, with additional padlock provision for security.
- Spring action handle, snaps back from upright to flat position.
- Robust steel ball shaped corners provide extra protection.
- Aluminium side-trim.
- Customisable name plaque.
- Upper Foam Insert features handles for easy removal and is ideal for smaller hand tools and accessories.
- Lower Foam Insert, with extra depth, is ideal for bulkier items such as cordless power tools, batteries and charger.
- Also supplied with hand tool holster, which is attached under the lid.
- There is also space for a tool roll (not supplied) between the top foam and the hand tool holster.
Case Dimensions:
585mm (L) x 410mm (W) x 235mm (D) - External
565mm (L) x 380mm (W) x 190mm (D) - Internal
Foam Insert Dimensions:
560mm (L) x 375mm (W) x 50mm (D) - Top Foam
560mm (L) x 375mm (W) x 100mm (D) - Bottom Foam
Supplied:
Tool Flight Case
2 x Standard Flexi Foam Inserts* (Upper & Lower)
1 x Hand Tool Holster
1 x Cutting Tool & Instructions
*Standard Flexi Foam is supplied Uncut.
Please note: Tools and Accessories (i.e. Sockets) shown in some of the images are not included. Images showing full contents are for illustration purposes only.
KWT-008 TYPE18 Combo Kits (with Flexi Foam)
£459.98
YOUR KIT. YOUR WAY.
Fully customisable and transportable tool storage solution, supplied with your choice of Kielder TYPE18 Tools, Batteries, Charger and Accessories in Custom Cut Flexi Foam which is softer and easier to cut by hand.
All included in a professional quality, heavy-duty case; ideal for motorsport service crews, race & rally teams, plus any application / industry where mobile tool and equipment storage is required, such as fitters, agriculture, construction, service and maintenance.
CHOOSE YOUR COMBO KIT
Simply check the Combo Kit table and make your selection from the dropdown box above.
Please note: Kits that are supplied with Impact Sockets will not be included in the Custom Cut Foam, giving you the choice on whether to store them in the upper or lower section.
All KWT-008 TYPE18 Combo Kits are supplied with:
• A selection of Kielder TYPE18 Tools, Batteries, Charger & Accessories.
• 1 x Custom Cut Flexi Foam (Lower) - CNC machined by Kielder for your chosen combo kit.
• 1 x Standard Flexi Foam (Upper) - uncut, meaning you can customise your own tool / accessory layout.
• Cutting Tool and Instructions on how to design your tool layout and cut the Flexi Foam.
Can't find what you're looking for?
BUILD YOUR KIT
...or call Kielder on 0114 242 3794 to create a custom kit that's right for you.
--------------------------------------------------------------------------------------
Tool Flight Case Features:
- Dual locking system, with additional padlock provision for security.
- Spring action handle, snaps back from upright to flat position.
- Robust steel ball shaped corners provide extra protection.
- Aluminium side-trim.
- Customisable name plaque.
- Upper Foam Insert features handles for easy removal and is ideal for smaller hand tools and accessories.
- Also supplied with hand tool holster, which is attached under the lid.
- There is also space for a tool roll (not supplied) between the upper section and the hand tool holster.
Case Dimensions:
585mm (L) x 410mm (W) x 235mm (D) - External
565mm (L) x 380mm (W) x 190mm (D) - Internal
Foam Insert Dimensions:
560mm (L) x 375mm (W) x 50mm (D) - Upper Foam (Standard Flexi)
560mm (L) x 375mm (W) x 100mm (D) - Lower Foam (Custom Cut Flexi)
--------------------------------------------------------------------------------------
KIELDER TYPE18 RANGE
BRUSHLESS MOTOR: ULTRA EFFICIENT POWER DELIVERY
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Increased run-time per battery charge.
TYPE18 BATTERY SYSTEM: COMPATIBLE & INTERCHANGEABLE**
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12m.
• No memory effect from partial charging.
**KWT-003-04 2.0Ah Battery not suitable for use with KWT-012 & KWT-002 1/2" Impact Wrenches and KWT-007 Angle Grinder.
18V: POWER TO GET THE JOB DONE
• High performance from a low electrical current, with no power drop off at peak output.
KWT-008 TYPE18 Combo Kits (with Pro Foam)
£479.98
YOUR KIT. YOUR WAY.
Fully customisable and transportable tool storage solution, supplied with your choice of Kielder TYPE18 Tools, Batteries, Charger and Accessories in Custom Cut Pro Foam which is similar to EVA; firmer, more robust and can only be machine cut.
All included in a professional quality, heavy-duty case; ideal for motorsport service crews, race & rally teams, plus any application / industry where mobile tool and equipment storage is required, such as fitters, agriculture, construction, service and maintenance.
CHOOSE YOUR COMBO KIT
Simply check the Combo Kit table and make your selection from the dropdown box above.
Please note: Kits that are supplied with Impact Sockets will not be included in the Custom Cut Foam.
All KWT-008 TYPE18 Combo Kits are supplied with:
• A selection of Kielder TYPE18 Tools, Batteries, Charger & Accessories.
• 1 x Custom Cut Pro Foam (Lower) - CNC machined by Kielder for your chosen combo kit.
• 1 x Standard Flexi Foam (Upper) - uncut, meaning you can customise your own tool / accessory layout.
• Cutting Tool and Instructions on how to design your tool layout and cut the Flexi Foam.
Can't find what you're looking for?
BUILD YOUR KIT
...or call Kielder on 0114 242 3794 to create a custom kit that's right for you.
--------------------------------------------------------------------------------------
Tool Flight Case Features:
- Dual locking system, with additional padlock provision for security.
- Spring action handle, snaps back from upright to flat position.
- Robust steel ball shaped corners provide extra protection.
- Aluminium side-trim.
- Customisable name plaque.
- Upper Foam Insert features handles for easy removal and is ideal for smaller hand tools and accessories.
- Also supplied with hand tool holster, which is attached under the lid.
- There is also space for a tool roll (not supplied) between the upper section and the hand tool holster.
Case Dimensions:
585mm (L) x 410mm (W) x 235mm (D) - External
565mm (L) x 380mm (W) x 190mm (D) - Internal
Foam Insert Dimensions:
560mm (L) x 375mm (W) x 50mm (D) - Upper Foam (Standard Flexi)
560mm (L) x 375mm (W) x 100mm (D) - Lower Foam (Custom Cut Flexi)
--------------------------------------------------------------------------------------
KIELDER TYPE18 RANGE
BRUSHLESS MOTOR: ULTRA EFFICIENT POWER DELIVERY
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Increased run-time per battery charge.
TYPE18 BATTERY SYSTEM: COMPATIBLE & INTERCHANGEABLE**
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12m.
• No memory effect from partial charging.
**KWT-003-04 2.0Ah Battery not suitable for use with KWT-012 & KWT-002 1/2" Impact Wrenches and KWT-007 Angle Grinder.
18V: POWER TO GET THE JOB DONE
• High performance from a low electrical current, with no power drop off at peak output.
KWT-012 TYPE18 18v 1/2" 700Nm Impact Wrench
£219.98
18v 1/2" Impact Wrench
Powered by a smooth, frictionless digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery, the Kielder KWT-012 1/2” Impact Wrench delivers huge torque performance (700Nm) from a short-body (172mm length). Market leading power-to-weight ratio – weighs just 2.2kg with 4.0Ah battery fitted. Ideal for the professional garage and workshop; a heavy-duty tool with a high level of break-away torque for wheel nuts and stubborn fastenings.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square Technology optimises the power to achieve top torque faster.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Offers a very high level of break-away torque; market leading performance from a short-body impact wrench.
• Variable speed trigger, plus high & low torque setting for ultimate control when tightening.
• High performance from a low electrical current, with no power drop off at peak output.
COMPACT & LIGHTWEIGHT
• Revolutionary short-body impact wrench; only 172mm in length, whilst still offering high torque performance.
• Design enables use within limited spaces if required
• 1/2” Square Drive, common fitment for sockets.
INCLUDES: Choice of Samsung Li-ion Batteries • Charger • Stackable Carry Case.
KWT-012 TYPE18 18v 1/2" 700Nm Impact Wrench (Bare)
£139.98
18v 1/2" Impact Wrench - Body Only
Powered by a smooth, frictionless digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery (not included), the Kielder KWT-012 1/2” Impact Wrench delivers huge torque performance (700Nm) from a short-body (172mm length). Market leading power-to-weight ratio – weighs just 2.2kg with a 4.0Ah battery fitted. Ideal for the professional garage and workshop; a heavy-duty tool with a high level of break-away torque for wheel nuts and stubborn fastenings. Compatible with Kielder TYPE18 battery system.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square Technology optimises the power to achieve top torque faster.
POWER TO GET THE JOB DONE
• Offers a very high level of break-away torque; market leading performance from a short-body impact wrench.
• Variable speed trigger, plus high & low torque setting for ultimate control when tightening.
• High performance from a low electrical current, with no power drop off at peak output.
*For best performance, use with TYPE18 4.0Ah battery (KWT-003-03).
1.5Ah (KWT-003-01), 2.0Ah (KWT-003-04) & 3.0Ah (KWT-003-02) batteries are not suitable for use with this product.
COMPACT & LIGHTWEIGHT
• Revolutionary short-body impact wrench; only 172mm in length, whilst still offering high torque performance.
• Design enables use within limited spaces if required
• 1/2” Square Drive, common fitment for sockets.
KWT-016 Power Tool Safety Lanyard
£15.98
Heavy-duty power tool safety lanyard, with a maximum load of 18kg. Ideal for use with Cordless Impact Wrenches and Drills, when working at height. Elasticated - energy absorbing - cord design helps to reduce the dynamic force produced from a tool drop. Features karabiner clips and hook & loop for quick and safe attachment.
- Length: 750mm (Min), 1100mm (Max)
- Maximum Load: 18kg
- Robust & Strong Cord (width 25mm)
- Clip size: 8 x 80mm
KWT-017 Quick Release Spare Wheel Strap
£24.98
- 3-point quick release strap to keep your spare wheel secure and allow quick, easy access.
- Ideal for motorsport and the perfect accessory to the KWT-017 Spare Wheel Impact Wrench Holder.
- Fixed mounts with 25mm wide webbing in black.
Strap Length:
From ratchet handle to end of single strap – 70cm
From ratchet handle to end of V strap – 45cm
SPARE WHEEL STRAP KITS ALSO AVAILABLE - CLICK HERE
KWT-017 Spacer Pack
£6.98
- Additional accessory to be used with KWT-017 Spare Wheel Impact Wrench Holder.
- Specifically designed to raise the position of the KWT-017 Impact Wrench Holder, within the wheel, so any required safety straps that go across the wheel, will hold Impact Wrench firmly in place.
- 1 x Spacer Height: 47mm.
- 2-Pack.
- Fire Retardant.
- Manufactured in the UK.
- Cost includes postage.
Spare Wheel Strap Kits Also Available - CLICK HERE
KWT-017 Spare Wheel Impact Wrench Holder (13")
£20.98
- Designed to fit in a car’s (13") spare wheel - securely holds and protects Kielder KWT-002 Impact Wrench (compatible with both 1st and 2nd generation models).
- Made from cut foam insert.
- Ideal for motorsport - Impact Wrench can be quickly accessed and reduces the need for extra straps and restraints that can cause delay.
- Depth: 45mm.
- Capacity for 2 x Impact Sockets to be stored.
- Fire Retardant.
- Manufactured in the UK.
Compatible with:
KWT-002 Impact Wrenches (both 1st and 2nd Generation models)
Impact Wrench & Impact Sockets sold separately.
Spare Wheel Strap Kits Also Available - CLICK HERE
KWT-017 Spare Wheel Impact Wrench Holder (15")
Sold Out
- Designed to fit in a car’s (15") spare wheel - securely holds and protects Kielder KWT-002 Impact Wrench.
- Made from cut foam insert.
- Ideal for motorsport - Impact Wrench can be quickly accessed and reduces the need for extra straps and restraints that can cause delay.
- Depth: 45mm.
- Capacity for 2 x Impact Sockets to be stored.
- Fire Retardant.
- Manufactured in the UK.
Compatible with:
KWT-002 Impact Wrenches (both 1st and 2nd Generation models)
Impact Wrench & Impact Sockets sold separately.
Spare Wheel Strap Kits Also Available - CLICK HERE
KWT-017 Spare Wheel Impact Wrench Holder (18")
£30.98
- Designed to fit in a car’s (18") spare wheel - securely holds and protects Kielder KWT-002 Impact Wrench.
- Made from cut foam insert - if required, you can trim down to your own bespoke size.
- Ideal for motorsport - Impact Wrench can be quickly accessed and reduces the need for extra straps and restraints that can cause delay.
- Depth: 45mm.
- Capacity for 2 x Impact Sockets to be stored.
- Fire Retardant.
- Manufactured in the UK.
Compatible with:
KWT-002 Impact Wrenches (both 1st and 2nd Generation models)
Impact Wrench & Impact Sockets sold separately.
Spare Wheel Strap Kits Also Available - CLICK HERE
KWT-017 Spare Wheel Strap Kits
£39.98
The complete, lightweight solution to keep your spare wheel and impact wrench secure for motorsport. Supplied as a pack with KWT-017-WS 3-Point Quick Release Wheel Strap, KWT-017 Impact Wrench & Socket Holder and KWT-017-SP Foam Spacers (2-Pack) to raise the holder height within the spare wheel, ensuring the strap makes contact with the impact wrench. .
KWT-017-30
Supplied: 13” Impact Wrench Holder, Wheel Strap & Spacers x 2
KWT-017-31
Supplied: 15" Impact Wrench Holder, Wheel Strap & Spacers x 2
KWT-017-32
Supplied: 18" Impact Wrench Holder, Wheel Strap & Spacers x 2
COMPLETE YOUR KIT
CLICK HERE to add a KWT-002-03 1/2" 430Nm Impact Wrench and choice of 1/2" Impact Socket.
Products Included:
Kielder KWT-017-WS Quick Release Wheel Strap
- 3-point quick release wheel strap to keep your spare wheel secure and allow quick, easy access.
- Perfect accessory to the KWT-017 Spare Wheel Impact Wrench Holder.
- Fixed mounts with 25mm wide webbing in black.
Strap Length:
From ratchet handle to end of single strap – 70cm
From ratchet handle to end of V strap – 45cm
Kielder KWT-017 Spare Wheel Impact Wrench Holder
- Designed to fit in a car’s spare wheel - securely holds and protects Kielder KWT-002 Impact Wrench.
- Available in three sizes: 13” (330mm) / 15” (381mm) / 18” (457mm).
- Made from cut foam insert – if required you can trim the 18” variant down to your own bespoke size.
- Impact Wrench can be quickly accessed.
- Depth: 45mm.
- Capacity for 2 x Impact Sockets to be stored.
- Fire Retardant.
- Manufactured in the UK.
Kielder KWT-017-SP Foam Spacers
- Specifically designed to raise the position of the KWT-017 Impact Wrench Holder, within the wheel, so any required safety straps that go across the wheel, will hold Impact Wrench firmly in place.
- 1 x Spacer Height: 47mm.
- 2-Pack.
- Fire Retardant.
- Manufactured in the UK.
KWT-017 Spare Wheel Strap Kits with Impact Wrench
£179.98
The complete, lightweight solution to keep your spare wheel and impact wrench secure for motorsport. Supplied as a pack with 3-Point Quick Release Wheel Strap, KWT-017 Impact Wrench Holder and KWT-017-SP Foam Spacers (2-Pack) to raise the holder height within the spare wheel, ensuring the strap makes contact with the impact wrench.
What's in Each Kit?
• 1 x Impact Wrench Holder (Select size from the dropdown menu above)
• 1 x 1/2" Impact Socket (Select size from the dropdown menu above)
• 1 x 3-Point Quick Release Wheel Strap
• 2 x Foam Spacers
• 1 x KWT-002-03 Impact Wrench Kit - includes the following:
- 1 x 1/2" 430Nm Impact Wrench
- 1 x TYPE18 4.0Ah Battery
- 1 x TYPE18 Charger
- 1 x Carry Case (for Impact Wrench)
KWT-126 1/2" Deep Impact Socket (17mm / M10)
£7.98
- Manufactured from high quality Chrome Molybdenum steel, offering increased durability.
- Strong and robust inner wall, whilst still maintaining slimline outer diameter for easy access to sunken wheel nuts.
- Even weight distribution along the socket length to impart maximum impact.
- Ideal accessory with Kielder 1/2" 18v Impact Wrench and compatible with all other brands.
Key Specification:
| Size / Fastening: | 17mm / M10 |
| Outer Diameter: | 25.7mm |
| Hex Wall Thickness: | 4mm (Flat) / 2.7mm (Corner) |
| Square Drive Wall Thickness: | 6.6mm (Flat) / 4.4mm (Corner) |
| Length: | 78mm |
| Weight: | 175g |
KWT-126 1/2" Deep Impact Socket (19mm / M12)
£7.98
- Manufactured from high quality Chrome Molybdenum steel, offering increased durability.
- Strong and robust inner wall, whilst still maintaining slimline outer diameter for easy access to sunken wheel nuts.
- Even weight distribution along the socket length to impart maximum impact.
- Ideal accessory with Kielder 1/2" 18v Impact Wrench and compatible with all other brands.
Key Specification:
| Size / Fastening: | 19mm / M12 |
| Outer Diameter: | 27.7mm |
| Hex Wall Thickness: | 4mm (Flat) / 2.7mm (Corner) |
| Square Drive Wall Thickness: | 7.3mm (Flat) / 5.3mm (Corner) |
| Length: | 78mm |
| Weight: | 210g |
KWT-126 1/2" Deep Impact Socket (21mm / M14)
£7.98
- Manufactured from high quality Chrome Molybdenum steel, offering increased durability.
- Strong and robust inner wall, whilst still maintaining slimline outer diameter for easy access to sunken wheel nuts.
- Even weight distribution along the socket length to impart maximum impact.
- Ideal accessory with Kielder 1/2" 18v Impact Wrench and compatible with all other brands.
Key Specification:
| Size / Fastening: | 21mm / M14 |
| Outer Diameter: | 29.6mm |
| Hex Wall Thickness: | 4mm (Flat) / 2.7mm (Corner) |
| Square Drive Wall Thickness: | 8.1mm (Flat) / 6mm (Corner) |
| Length: | 78mm |
| Weight: | 250g |
KWT-126 1/2" Deep Impact Socket Set (3pc)
£21.98
Contains: 17mm, 19mm & 21mm Sockets, plus holder for convenient storage.
- Manufactured from high quality Chrome Molybdenum steel, offering increased durability.
- Strong and robust inner wall, whilst still maintaining slimline outer diameter for easy access to sunken wheel nuts.
- Even weight distribution along the socket length to impart maximum impact.
- Ideal accessory with Kielder 1/2" 18v Impact Wrench and compatible with all other brands.
Key Specification:
| Size / Fastening: | 17mm / M10 |
| Outer Diameter: | 25.7mm |
| Hex Wall Thickness: | 4mm (Flat) / 2.7mm (Corner) |
| Square Drive Wall Thickness: | 6.6mm (Flat) / 4.4mm (Corner) |
| Length: | 78mm |
| Weight: | 175g |
| Size / Fastening: | 19mm / M12 |
| Outer Diameter: | 27.7mm |
| Hex Wall Thickness: | 4mm (Flat) / 2.7mm (Corner) |
| Square Drive Wall Thickness: | 7.3mm (Flat) / 5.3mm (Corner) |
| Length: | 78mm |
| Weight: | 210g |
| Size / Fastening: | 21mm / M14 |
| Outer Diameter: | 29.6mm |
| Hex Wall Thickness: | 4mm (Flat) / 2.7mm (Corner) |
| Square Drive Wall Thickness: | 8.1mm (Flat) / 6mm (Corner) |
| Length: | 78mm |
| Weight: | 250g |
KWT-126-PO 1/2" 21mm Impact Socket + Pin & O-Ring
£9.98
- 1 x 21mm (M14) Socket & 1 x Pin O-Ring
- Impact Socket manufactured from high quality Chrome Molybdenum steel, offering increased durability
- Strong and robust inner socket wall
- Robust & sturdy pin; made from grade 303 stainless steel
- Ideal accessory when working at height
Key Specification of Impact Socket:
| Size / Fastening: | 21mm / M14 |
| Outer Diameter: | 29.6mm |
| Hex Wall Thickness: | 4mm (Flat) / 2.7mm (Corner) |
| Square Drive Wall Thickness: | 8.1mm (Flat) / 6mm (Corner) |
| Length: | 78mm |
| Weight: | 250g |
KWT-BMC Kielder Carry Case
£14.98
Protective Blow Moulded Carry Case; compatible with the following Kielder TYPE18 Power Tools
• KWT-001 Drill Driver
• KWT-002 1/2" Impact Wrench
• KWT-002 3/8" Impact Wrench
• KWT-002CS 1/2" Impact Wrench
• KWT-005 1/4" Impact Driver
© 2020 Kielder. Powered by Shopify
