BARE UNITS
KWT-001 18v Combi Drill Bare (body only)
£54.98
18v Combi Drill - Bare Unit
Well-balanced combi drill with a robust all-metal chuck. Ideal for an array of drilling applications. Features 16 torque settings plus drill function and a hammer mode for masonry. Driven by a digital brushless motor and fuelled by Samsung Li-Ion batteries (not included), offering high performance, long run-time and lifespan. Other features included a moulded soft-grip handle and variable speed trigger for optimum control. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• 38mm max drilling diameter in wood.
• 13mm max drilling diameter in steel.
• 10mm max drilling diameter in masonry.
• Max. torque: 52Nm
• 16 torque settings for driving, plus drill & hammer modes.
• 2 Speed gearbox: 0-400 min-1 / 0-1450 min-1.
• Variable trigger switch allows further speed control.
LIGHTWEIGHT & STRONG
• Weighs in at only 1.8kg with battery fitted.
• Extensive over-moulded rubber hand grip for comfort and protection.
KWT-001 18v Drill Driver Bare (body only)
£42.98
18v Drill Driver - Bare Unit
Bare unit, exactly the same brushless drill driver as what is supplied in the kit versions. If you already have TYPE18 batteries to hand this bare unit represents incredible value as an additional item. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• 38mm max drilling diameter in wood.
• 13mm max drilling diameter in steel.
• 52Nm Max Torque driven through 16 Torque settings for driving, plus drill mode.
• 2 Speed gearbox: 0-400 min-1 / 0-1450 min-1.
• Variable trigger switch allows further speed control.
LIGHTWEIGHT & STRONG
• Weighs in at only 1.5kg with 2.0Ah battery fitted.
• Extensive over-moulded rubber hand grip for comfort and protection.
KWT-002 18v 3/8" Impact Wrench Bare (body only)
£79.98
18v 3/8" Impact Wrench - Bare Unit
Featuring 3/8" square drive allowing you to fit slim-line sockets (from 6mm diameter), this lightweight, compact wrench is ideal when working on smaller fastenings in hard-to-reach areas. So whether you're removing a car's oil pan or even servicing a go-kart, the nimble KWT-002 3/8" is the perfect tool. Equipped with moulded soft grip handle and variable speed trigger switch for optimum comfort and control. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
VERSATILE & EASY TO USE
• High performance from a low electrical current, with no power drop off at peak output.
• Variable trigger switch allows speed control when tightening, particularly useful on small fastenings.
• Suitable for a variety of applications; from 6mm to 19mm impact sockets can be used.
COMPACT & LIGHTWEIGHT
• 3/8" enables use of slim sockets for easy access to smaller fastenings.
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
KWT-002-06 18v 1/2" 430Nm Impact Wrench Bare (body only)
£89.98
18v 1/2" Impact Wrench - Bare Unit
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery (not included), the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg with a battery fitted it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before. Compatible with Kielder TYPE18 battery system.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
KWT-002CS 18v 1/2" Impact Wrench Bare (body only) - CS / Site Model
£114.98
18v 1/2" Impact Wrench - Construction / Site Model - Bare Unit
Featuring clip and pin type 1/2" square drive and enhanced dust protection, the KWT-002CS is more suited towards construction / site work, or any application where the socket size is not frequently changed. The smooth digital brushless motor maximises your work-time per battery charge and the compact lightweight design enables it to be used in tight or awkward spaces. Plus with a market leading ‘power to weight ratio’ there’s more than enough nut-breaking torque to deal with stubborn fixings. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Clip & Pin Square Drive (SKWT-002-CSPO O-Ring & Pin can be used to secure socket - sold separately).
INCLUDES: 1/2" CS Impact Wrench • Service Offer.
KWT-005 18v 1/4" Impact Driver Bare (body only)
£79.98
18v 1/4" Impact Driver - Bare Unit
Boasting 200Nm of torque and 3250 impacts per minute, this compact, lightweight Impact Driver makes simple work of the most demanding applications. Powered by a digital brushless motor and fuelled by Samsung Li-Ion batteries (not included) which enhances the performance, as well as offering longer run-time and tool life. Features moulded soft-grip handle and variable speed trigger switch for optimum comfort and control. Compatible with Kielder TYPE18 battery system.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
POWER TO GET THE JOB DONE
• High performance from a low electrical current, with no power drop off at peak output.
• Variable trigger switch allows speed control when tightening, particularly useful on more delicate building materials such as plasterboard.
• Suitable for a variety of applications where high torque is required, such as wide gauge screws and fastenings.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/4” Keyless Bit Holder.
KWT-006 18v LED Worklight (Bare Unit)
Sold Out
18v LED Worklight
Multi-positional, pocket-sized ultra bright LED worklight. Bare unit; compatible with all Kielder TYPE18 batteries.
COMPACT & VERSATILE
• 3 LED design.
• Over 16 hours illumination from 4.0Ah battery.
• Bright white light for clarity.
• Multi-positional to suit application, offers 180 degree adjustment of lit area.
• Unique latching hook design means you can easily hang within or above work area.
• Adjustable angle function to direct the light precisely where you need it.
• Folds neatly down to pocket size.
KEY SPECIFICATION
Weight (with 2.0Ah battery): 0.5kg
Weight (without battery): 0.14kg
Length: 117mm
Width: 74mm
Height: 40mm
KWT-007 18v 115mm Angle Grinder Bare (body only)
£109.98
18v 115mm Angle Grinder - Bare Unit
Powered by a digital brushless motor, this versatile 18v Li-ion Angle Grinder can be used for an array of grinding & cutting applications. With a long-run 4.0Ah battery fitted* (not included) it will typically provide 15-20 minutes grinding performance, so you can enjoy the freedom of cordless for longer. Features a shaped ergonomic soft-grip handle, which provides comfortable continuous operation and unobtrusive reverse-fit battery that balances the tool in use. The Kielder KWT-007 ticks all of the boxes for fast, effective grinding - POWER. ENDURANCE. BALANCE.
*For best performance, use with TYPE18 4.0Ah battery (KWT-003-03).
1.5Ah (KWT-003-01) & 2.0Ah (KWT-003-04) batteries are not suitable for use with this product.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• No sparking, from motor, during operation.
• Features electric current overload protection for longer service life and battery run-time.
POWER TO GET THE JOB DONE
• The convenience of cordless, but without compromising performance; proficient and effective in a variety of applications.
• The digital brushless motor delivers consistent power for faster grinding.
• Long run-time; a fully charged battery offers up to 20 minutes working time.
• High performance from a low electrical current, with no power drop off at peak output.
BALANCED & ERGONOMIC
• Ergonomically formed handle; designed for ultimate comfort when used for prolonged periods.
• Balanced feel in use.
• Reverse-fit battery maintains a compact overall profile.
• Central spindle lock position means you can comfortably operate a disc change with either hand.
• Features cam-lock adjustable guard mechanism, for quick adjustment around the disc.
KWT-012 18v 1/2" 700Nm Impact Wrench Bare (body only)
£139.98
18v 1/2" Impact Wrench - Bare Unit
Powered by a smooth, frictionless digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery (not included), the Kielder KWT-012 1/2” Impact Wrench delivers huge torque performance (700Nm) from a short-body (172mm length). Market leading power-to-weight ratio – weighs just 2.2kg with a 4.0Ah battery fitted. Ideal for the professional garage and workshop; a heavy-duty tool with a high level of break-away torque for wheel nuts and stubborn fastenings. Compatible with Kielder TYPE18 battery system.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square Technology optimises the power to achieve top torque faster.
POWER TO GET THE JOB DONE
• Offers a very high level of break-away torque; market leading performance from a short-body impact wrench.
• Variable speed trigger, plus high & low torque setting for ultimate control when tightening.
• High performance from a low electrical current, with no power drop off at peak output.
*For best performance, use with TYPE18 4.0Ah battery (KWT-003-03).
1.5Ah (KWT-003-01), 2.0Ah (KWT-003-04) & 3.0Ah (KWT-003-02) batteries are not suitable for use with this product.
COMPACT & LIGHTWEIGHT
• Revolutionary short-body impact wrench; only 172mm in length, whilst still offering high torque performance.
• Design enables use within limited spaces if required
• 1/2” Square Drive, common fitment for sockets.
© 2019 Kielder. Powered by Shopify
