IMPACT WRENCHES 1/2"
KWT-012 TYPE18 18v 1/2" 700Nm Impact Wrench (Kits)
£219.98
18v 1/2" Impact Wrench
Powered by a smooth, frictionless digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery, the Kielder KWT-012 1/2” Impact Wrench delivers huge torque performance (700Nm) from a short-body (172mm length). Market leading power-to-weight ratio – weighs just 2.2kg with 4.0Ah battery fitted. Ideal for the professional garage and workshop; a heavy-duty tool with a high level of break-away torque for wheel nuts and stubborn fastenings.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square Technology optimises the power to achieve top torque faster.
LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Offers a very high level of break-away torque; market leading performance from a short-body impact wrench.
• Variable speed trigger, plus high & low torque setting for ultimate control when tightening.
• High performance from a low electrical current, with no power drop off at peak output.
COMPACT & LIGHTWEIGHT
• Revolutionary short-body impact wrench; only 172mm in length, whilst still offering high torque performance.
• Design enables use within limited spaces if required
• 1/2” Square Drive, common fitment for sockets.
INCLUDES: Choice of Samsung Li-ion Batteries • Charger • Stackable Carry Case.
KWT-002-08 TYPE18 18v 1/2" 430Nm Impact Wrench (Kit - includes 3 Impact Sockets)
£204.98
18v 1/2" Impact Wrench
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery, the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg (including the battery) it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
INCLUDES: 2 x 4.0Ah Samsung Li-Ion Battery • Charger • 3 x 1/2" Impact Sockets (17, 19 & 21mm) • Stackable Carry Case.
KWT-002-03 TYPE18 18v 1/2" 430Nm Impact Wrench (Kit)
£159.98
18v 1/2" Impact Wrench
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery, the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg (including the battery) it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
4.0 Ah; LONG RUN ‘FUEL TANK’
• High quality Samsung battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
INCLUDES: 1 x 4.0Ah Samsung Li-Ion Battery • Charger • Stackable Carry Case
KWT-002-88 TYPE18 18v 1/2" 430Nm Impact Wrench + 1 x 5.0Ah Li-ion (BARE & BATTERY ONLY)
Sold Out
18v 1/2" Impact Wrench (BARE & BATTERY ONLY)
Charger and Carry Case not supplied with this variant but are sold separately and full kits also available.
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-quality Li-Ion battery, the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg (including the battery) it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
5.0 Ah; LONG RUN ‘FUEL TANK’
• High quality battery cells providing reliable & stable performance.
• Lithium-ion technology, a charged battery will hold it’s charge for up to 12 m.
• No memory effect from partial charging.
• Compatible with Kielder TYPE18 battery system.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
INCLUDES: 1 x 5.0Ah Li-Ion Battery • Belt Clip
KWT-012 TYPE18 18v 1/2" 700Nm Impact Wrench (Bare)
£139.98
18v 1/2" Impact Wrench - Body Only
Powered by a smooth, frictionless digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery (not included), the Kielder KWT-012 1/2” Impact Wrench delivers huge torque performance (700Nm) from a short-body (172mm length). Market leading power-to-weight ratio – weighs just 2.2kg with a 4.0Ah battery fitted. Ideal for the professional garage and workshop; a heavy-duty tool with a high level of break-away torque for wheel nuts and stubborn fastenings. Compatible with Kielder TYPE18 battery system.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square Technology optimises the power to achieve top torque faster.
POWER TO GET THE JOB DONE
• Offers a very high level of break-away torque; market leading performance from a short-body impact wrench.
• Variable speed trigger, plus high & low torque setting for ultimate control when tightening.
• High performance from a low electrical current, with no power drop off at peak output.
*For best performance, use with TYPE18 4.0Ah battery (KWT-003-03).
1.5Ah (KWT-003-01), 2.0Ah (KWT-003-04) & 3.0Ah (KWT-003-02) batteries are not suitable for use with this product.
COMPACT & LIGHTWEIGHT
• Revolutionary short-body impact wrench; only 172mm in length, whilst still offering high torque performance.
• Design enables use within limited spaces if required
• 1/2” Square Drive, common fitment for sockets.
KWT-002 18v TYPE18 1/2" 430Nm Impact Wrench (Bare)
£89.98
18v 1/2" Impact Wrench - Body Only
Ideal for automotive use as well as a range of engineering and workshop applications. Powered by a smooth digital brushless motor and fuelled by a high-tech Samsung Li-Ion battery (not included), the Kielder KWT-002 1/2” Impact Wrench delivers high torque performance (430Nm) in a compact size (152mm length). Weighing only 1.7kg with a battery fitted it is well balanced and comfortable to operate, even in those tight / awkward areas. Makes easy work of assembly or disassembly tasks around the garage and workshop. Features Kielder's G-Square+ Technology which maximises the power delivery to achieve top torque faster than ever before. Compatible with Kielder TYPE18 battery system.
Please note: this product is not suitable for Scaffolding use, due to ball bearing square drive. The KWT-002CS model, with clip & pin square drive, is better suited to scaffolding application.
ULTRA EFFICIENT POWER DELIVERY & INCREASED RUN TIME PER CHARGE
• 4 Pole; producing higher torque at lower speeds.
• Frictionless; cool operating temperature, no sparking & long lifespan.
• Electronic brake system offers almost instant stopping power.
• G-Square+ Technology maximises the power to achieve top torque faster than ever before.
POWER TO GET THE JOB DONE
• Market leading performance from a compact design impact wrench.
• More than double the torque of a typical wheel nut.
• Variable trigger switch allows speed control when tightening.
COMPACT & LIGHTWEIGHT
• Only 152mm in length, able to operate in confined spaces.
• Balanced weight distribution during use.
• 1/2” Square Drive, common fitment for sockets.
© 2021 Kielder. Powered by Shopify
